Home Mail Version for print
Official distributor
GE Sensing & Inspection Technologies   FLIR Systems

Capillary NDT method

 


Back call
Name *
Phone *
Message
Six plus one equals...
Answer:



News
Updated CE Certificates
Updated and expanded CE Certificates for Radiation Protection from ONIKO company



Publications
On-Site Generation (OSG) Technology for Beverage Industry Sanitation

In beverage bottling and canning plants, Clean-in-Place (CIP) is used to clean various product lines such as syrup and water lines for a variety of reasons including flavor carryover prevention and microbial control.

CIP also eliminates organic residues like precipitated proteins, carbohydrates, fats, minerals and other contaminants that harbor bacteria and may lead to microbial induced corrosion (MIC).



ZYGLO ZL-2C, ZL-27A, ZL-37 Post Emulsifiable Fluorescent Penetrant
ZYGLO ZL-2C, ZL-27A, ZL-37 Post Emulsifiable Fluorescent Penetrant
Producer: Magnaflux, England

ZL-2C and ZL-27A are typically used on castings, forgings, and extrusions, rough and machined surfaces to find cracks, seams, laps, laminations and porosity.
ZL-37 is ideal for titanium turbine components, investment castings and other high stress critical components where detection of fine, tight and broad open shallow discontinuities is a must.

 
ZYGLO ZL-15B, ZL-19, ZL-60C, ZL-60D, ZL-67, ZL-56 Water Washable Penetrant
ZYGLO ZL-15B, ZL-19, ZL-60C, ZL-60D, ZL-67, ZL-56 Water Washable Penetrant
Producer: Magnaflux, England

ZYGLO Water Washable Penetrants are used to check for cracks in a wide range of sensitive applications. Our penetrants fluoresce a greenish-yellow color under ultraviolet radiation. Use black light sources with peak wavelength of 365 nanometers such as MAGNAFLUX ZB-100F Fan-Cooled Black Light.

 
ZYGLO ZP-4B, ZP-5B, ZP-9F, ZP-14A Developers
ZYGLO ZP-4B, ZP-5B, ZP-9F, ZP-14A Developers
Producer: Magnaflux, England

ZYGLO is an extremely sensitive fluorescent penetrant inspection method that reveals cracks and other surface discontinuities in virtually any non-porous material.
- ZYGLO is available in aerosols and liquid form.
- Five sensitivity levels to satisfy military, industry or company specifications.
- Water Wash and Post Emulsifiable penetrants are available.
- Full line of emulsifiers, removers and developers.

 
ZYGLO ZE-4B Lipophilic Emulsifier & ZR-10C Hydrophilic Remover
ZYGLO ZE-4B Lipophilic Emulsifier & ZR-10C Hydrophilic Remover
Producer: Magnaflux, England

ZYGLO ZE-4B is a biodegradable, reddish, slightly viscous liquid used for the emulsification of Zyglo PE penetrants. ZE-4B is a general-purpose emulsifier with a moderate rate of action. ZE-4B can be used in open tanks due to its low volatility and high flash point.
ZYGLO ZR-10C is a water soluble remover concentrate which is used diluted as the remover / emulsifier in post removable penetrant systems. ZR-10C is generally used in the concentration range 5% to 20% in water.

 
ZYGLO ZA-43 Portable Kits
ZYGLO ZA-43 Portable Kits
Producer: Magnaflux, England

A lightweight, portable kit for mobile, remote or low frequency fluorescent crack inspection. This popluar kit is stocked complete with an instructional guide.
Kit Includes: 1 can of ZL-60C WW Fluorescent Penetrant, 1 can of ZP-9F Developer, 2 cans of SKC-S Cleaner, 1 container of ZP-4B dry developer, 2 Wiping Cloths, Wire brush, Portable Plastic Case and Instructions,ZB-100F Fan-Cooled Black Light

 
SPOTCHECK Penetrants, Cleaners, Developers
SPOTCHECK Penetrants, Cleaners, Developers
Producer: Magnaflux, England

SPOTCHECK is the most reliable and widely used penetrant inspection method that reveals cracks and other surface discontinuities in virtually any non-porous material.
SPOTCHECK’s formulation, using a high concentration of quality dyes, together with high quality solvents, provides the best possible dye penetrants for finding the smallest and finest defects. Other products may skimp on dyes or use inferior solvents that cut costs. In doing so, indications do not appear as bright or vibrant and cracks can be missed. Some inferior solvents may also cause health hazards.

 
SPOTCHECK SK3-S KT Portable Kit
SPOTCHECK SK3-S KT Portable Kit
Producer: Magnaflux, England

Набор MAGNAFLUX SK3-S Kit предназначен для проведения капиллярного контроля. Наиболее всего удобен при работе в полевых условиях.

 
ZygloScan Fluorescent Penetrant Inspection (FPI) System
ZygloScan Fluorescent Penetrant Inspection (FPI) System
Producer: Magnaflux, England

ZygloScan is a state-of-the-art inspection system that consists of a polarized laser, a highly sensitive camera and a computer.
This optical-based technology will improve your inspection process with greater accuracy, speed and reliability.
ZygloScan detects the depth, length and width of the fluorescent penetrant in the crack and then provides a 3-Dimensional display of the information. ZygloScan is available as both an automated system and a portable unit.

 
ZYGLO ZL5, ZL7 Fluorescent Additive
ZYGLO ZL5, ZL7 Fluorescent Additive
Producer: Magnaflux, England

Fluorescent Water Additive for Leak Detection
For water based systems (such as a large tank or pipe system containing water), ZL- 5 Water Soluble Fluorescent additive powder may be added. ZL-5 should be dissolved in water in a separate container as a concentrate and then added to the water in the tank or pipe system that is to be tested. The exterior is checked with a black light.
For oil based applications (such as certain engines containing oil or containers that hold oil), ZL- 7 Oil Soluble fluorescent liquid additive is added to the system, the system is circulated, and the exterior is checked with a black light.

 
Test Pieces for Penetrant Testing
Test Pieces for Penetrant Testing
Producer: Magnaflux, England

Test Pieces for Penetrant Testing
 


© Any use of the site materials without written permission of ONIKO administration is prohibited.